Great Chair with Ugly Seat Cover. Reupholstering the seat of a dining style chair is one of the easiest ways to make a big change with little effort. This sturdy, comfortable ladder-back is perfect for the worktable in my library. The lines are simple, but the arms have an unexpected curve. Though the finish is nearly perfect, the seat fabric is boring and filthy. The room doesn't get much natural light, so something bright is best. A geometric pattern would work well with the lines of the chair, but a pattern with some curves... Unscrewing the Chair Seat. Turn the chair upside down, and unscrew the seat from the frame. Once you’ve removed the seat, make your repairs to the wood part of the chair -- painting, refinishing, or tightening joints. Make sure everything is dry, not sticky to the touch, before you reattach the seat. Note: If you encounter a tack strip, a long strip of cardboard with tacks that hold the seat to the frame, instead of screws, just pry the seat off with a flathead screwdriver.

Turn the seat over. Use a staple remover to remove the old fabric. If the staples are stubborn, pull them out with needle-nose pliers. Save the old seat fabric. You'll need to use it as a pattern. Note: If the padding is in bad shape, or you just want a softer seat, add a new layer of batting. It's sold in most fabric and hobby stores. Add it to your seat by using the steps on pages 5- 7, but with a sheet of batting instead of your new fabric. If your new seat fabric has a pattern, turn the seat right-side up and place the new fabric on top. Pressing around the perimeter of the seat, center your pattern. Mark the corners with straight pins. You can skip this step if your fabric doesn't have a pattern. Using Old Cover as a Pattern. Turn your new fabric right-side down, and put the old seat cover on top as a pattern. Note the locations of your pins from page 4 and adjust if needed, feeling underneath. Line up the corner creases of the old seat cover with your straight pins.

Weight down the old cover at the corners, and trace around the old seat cover with a pencil or chalk. Smooth out the edges with your hands as you trace it, so your new cover doesn't end up too small. You can pin the old seat cover to your new fabric Stapling New Cover to Seat. Turn your new seat cover right-side down. Place the seat cushion, also right-side down, on top of it. If you have pins to mark the corners of a patterned fabric, make sure they are aligned with the corners of the seat cushion. Starting with the top edge, staple once in the center. Repeat with the bottom edge, pulling the fabric tight before you staple. Repeat with each side, and keep pulling the fabric tight before you staple. Working one side at a time, staple from the center outward, until that Grasp one corner of your cover and pull the point toward the center of the seat cushion. Arrange the remaining unstapled corner fabric into small even pleats, pulling tightly.

Make sure you don't staple over the screw holes. Repeat steps 1- 3 for the three remaining corners. Attaching Welt to Seat. This step is optional. Welt is often called piping or cording. Using it will give the seat a professional, finished look, and, in this case, adds a nice pop of color. You can buy decorative cording in fabric or upholstery shops, or make your own. To apply the welt, arrange it along the edge of the seat and staple the lip, the flat edge. bean bag chair londonWhen you turn the seat over, only the rounded edge with the cord inside should show.tub chairs for sale canada Place the seat on the chair frame. bean bag chair londonLine up the screw holes of the seat and chair frame.rocking chair for baby nursery

Get the screws started, so the seat doesn't fall off once you turn the chair upside down. Turn the chair over and tighten the screws until the seat is firmly attached. Be careful not to tighten too much; you don't want to strip the holes. Admire your new chair. In this case, the simple cotton compliments the oak. The birds in the pattern make it feel earthy rather than prissy, though it’s still a nice contrast to... Todd Marine Products is committed to designing and manufacturingbuy leather captains chair innovative, high quality merchandise at competitive prices. patio lounge chairs ebayWe provide the best in customer service and to deliver products efficiently and completely. Todd Marine Products manufacturers: Boat Seats, Chairs, Marine Supplies, Marine Accessories, Marine Products, Marine Chairs, Helm Chairs, Marine Equipment, Supplies, Marine Tanks, Marine Cushions, Marine Hardware, Cushions, Boat

Hardware, Luxury Seats, Boat Seat Packages, Fishing Seats, Cushions for Seats, Ladderback Seats, Helm Seats, Boat Seat Hardware, Swingback Seats, Center Console Boat Seats and Pedestals. Todd products are SALTWATER TOUGH! All our seats and hardware meet the highest standards of the American Boat and Yacht Council (ABYC) , so when you install a Todd seat, you will never worry about quality, durability or reliability. Every product in our line-up is designed to withstand the harsh saltwater environment and the demands of marine use.2-Piece Plastic Injection Seat Covered With A UV-Stabilized Polypropylene Substrate For Durability. On Back Of Seat. Molded Armrest With Polished Aluminum Brackets.The Stool 60 Giveaway. Sign up for our emails and a chance to win this ingenious stackable stool. Sign up for DWR emails and get early notice on sales and new products.Shop unique and handmade items directly from creative people around the world