Instead of buying new furniture every time one of your existing pieces looks tired and dated, why not get it reupholstered? If you start off buying quality, well-made pieces with solid structures you can save tons of money over time by reupholstering them when the fabric gets old or dated-looking. With that said, it's important to know furniture upholstery costs so you can weigh the pros and cons with each individual piece. In some cases, it might be worth it to start fresh with a new piece of furniture. The following costs are general and will not always be accurate depending on where you live and what furniture upholstery company you use. But it's a very good starting point and will give you an idea of common costs. The sofa is often the most expensive piece of furniture in the house. It takes up a lot of room and it also often takes a lot of abuse. A really good quality sofa should last about 25 years, but over that period of time, ​the fabric can get worn and dated.

Reupholstering is often a really good option. If you have a classic three-seat sofa you can expect to pay approximately $600 in labor plus the fabric costs. The cost of fabric can vary wildly so there's no way to give an average. Most three-seaters will require about 18 yards of fabric so keep that in mind when choosing. Remember also that a fabric with a large-scale pattern might require a bit more. There are two ways to get fabric. Some upholsterers will want you to buy it from them. Sometimes this can be a bit more expensive but you don't have to worry about finding the proper amount or anything like that. The furniture upholstery company will take care of it for you. The other option is to find your own. This is known as COM (customers own material). You'll need to get an estimate from the upholsterer to make sure you buy the right amount. This can be less expensive but it requires a little more work on your part. (Also make sure that the fabric you buy is durable enough to use for furniture upholstery -- you don't want anything too thin).

All of the same considerations should apply to loveseats. Keep in mind the cost will be a bit lower. Labor should be approximately $500 and you'll need roughly 14 yards of fabric. Again, be sure to get a proper estimate before buying. dining room chairs under $20Remember that it's always better to have too much fabric instead of too little. hay about a chair coralIf you have some leftover you can always have pillows made.best bean bag chair for gaming Large armchairs such as wingback chairs or bergeres will cost a similar amount to a loveseat. plastic lawn chair repairThis is because there's just as much work that goes into them. chaise lounge chair indoor for sale

You'll be looking at approximately $400 for one chair. Usually, seven yards of fabric is a good amount, but again, chairs vary in size so be sure to get an estimate first. Wood chairs (such as dining room chairs) can cost anywhere from $100 to $250 to have the seats redone. best convertible baby high chairIt depends on whether or not you want to have trim or other details.high chair baby depot (If they're pop out seats it's significantly cheaper – and it's really easy to do it yourself!). deck chairs for sale cape townIf you're doing the seats and the backs you'll need anywhere from one to three yards of fabric.chair height toilets round

Sometimes you might find that having a slipcover made is preferable to reupholstering. Slipcovers can be great because they can be taken off and washed, but it's important to know that it's not any cheaper. The labor costs will be roughly the same for sofas loveseats and chairs and will take about the same amount of fabric. Ottomans, whether they're large ones you're using instead of a coffee table or small ones that are being used as footstools, can be costly. Prices can vary greatly due to the extra work that often goes into making them. Ottomans are often tufted and have details like nailhead trim and these things can take a lot of work. Prices can go as high as $1000. That said, they can also go as low as $500. The amount of fabric will depend wholly on the size of the piece. Reupholstering Furniture is an Easy DIY Home Improvement Project Reupholstering dining room chairs is a very easy home improvement project to undertake, and the results give any room an instant face-lift.

We had six heavily stained dining room chairs in desperate need of a makeover. The cost of professionally reupholstering the chairs was prohibitive, so I took the plunge and bought upholstery fabric from a local craft and hobby shop. The total cost of reupholstering our six dining room chairs was $65, which included the shipping cost for the special-order fabric. This home improvement project requires no special skills: there is no need to sew, use heavy machinery, or make difficult mathematical calculations. I am not a "crafty" person and have no ability to sew, but I was able to recover all of our dining room chairs with little difficulty. The most difficult part of the process was actually removing the old fabric, which was held down with approximately ten million staples! The only tools required for this project are scissors, a screwdriver, needle-nose pliers, and a staple gun. An Easy Way to Spruce Up the House Reupholstering: Tools and Fabric Required The following tools are necessary to reupholster dining room chairs:

Screwdriver to remove the chair seat (Phillips or flat-head, depending on the type of screws used to hold the chair seat onto the chair). Scissors or utility knife to cut the old fabric off the chair. Needle-nose pliers to remove old staples holding the stained fabric down. High quality upholstery fabric. For six dining room chairs, I required 2 1/2 yards of 54" width home decorating fabric. The fabric must be purchased in whole yards, so I purchased three yards of fabric. Upholstery fabric is sold in rolls, usually with a specified width. The fabric I purchased for my chairs, for example, had a 54" width. This was wide enough to accommodate two chairs. I purchased 3 yards of the 54" fabric to cover six chairs. To determine how much fabric you will need, simply measure the bottom of each seat and add approximately 6" to the outside edge. This will give you enough material to wrap around the seat and staple it to the bottom of the chair. Choosing New Fabric The white, stained fabric on our dining room chairs was not washable.

For our family, finding a cleanable, patterned fabric was a priority. Upholstery fabric should not stretch easily, or the fabric will warp and become loose on the seat over time. Choose a tight weave in a non-stretchy fabric. The pattern on the upholstery fabric matters: solids and random patterns are easier to line up with a chair seat than stripes. Despite the difficulty with aligning striped material, the upholstery fabric I fell in love with had a striped pattern: I simply lined up the fabric carefully with the chair seat and made sure the stripes did not get off-kilter during the process of stapling on the new fabric. Upholstery material is usually a heavy fabric, and may be made from cotton, polyester, vinyl, or other materials. The "cleanability" of the fabrics will depend on the material: wool will have to be professionally cleaned, for example, while vinyl will be easy to wipe clean with a cloth. I chose a cotton/poly blend that was cleanable with solvents or water based cleaners.

The label on the cloth will state how the material should be cleaned: check this label prior to purchasing your cloth. The "cleaning codes" on upholstery fabric are as follows: W: Clean with a water based cleaner. S: Clean with a solvent based cleaner (do not use any water or products containing water). S-W: Clean with water-based or solvent cleaners. X: Do not clean with water-based or solvent cleaners. Upholstering Dining Room Chair Pictures Click thumbnail to view full-size Upholstering a Chair: A Step-By-Step Guide Unscrew the seat of the chair. Remove the screws and set them aside in a safe place. Use scissors or a utility knife to cut away the old fabric. Use a flat-head screwdriver to pry up the old staples if necessary, and needle-nose pliers to pull the old staples out of the wooden seat base. If the foam of the seat is in poor condition, replace it with new high-density foam. Simply glue to new foam to the wooden seat base. I did not need to do this with our dining room chairs.

Cut out a square of upholstery fabric to fit the seat. I cut a square about 4-6" larger than the seat of the chair, to have enough fabric to wrap and staple under the seat. Place the seat cushion and wood base on the fabric, making sure the "right side" of the fabric is facing out. Grab a section of fabric and pull it very tightly: staple one side of the fabric to the wood base. Continue to pull the fabric until it is very taught and staple the fabric once on each side of the chair base to tack the fabric to the seat. Staple the fabric around the edges of the seat, pulling the fabric so that it remains taught. Pull the corners of the fabric in last, trying to create a smooth corner. You may need to cut some of the fabric away to get the best effect. Hold the bunched fabric very tightly and staple it down. Repeat with each corner. Place the reupholstered seat onto the chair and screw it back into place. Why do you need to reupholster your furniture? My furniture is heavily stained and is not washable.